Arri 3/8in Pin-Loc 15mm Pivot Clamp

The Arri 3/8" Pin-Loc 15mm Pivot Clamp allows you to add an offset 15mm rod mount to your camera setup via any Arri 3/8" Pin-Loc mounting pattern.

Mount the clamp to any Arri style mounting point by tightening the screw with a 5/32 or 4mm Hex Key, which can be positioned at 90-degree increments.

Make use of the positive Ball-Loc system to adjust the angle of the 15mm rod by 15 degree increments.

The Arri 3/8" Pin-Loc 15mm Pivot Clamp increases your camera support mounting options, while allowing for adjustability.

3/8-16" thread is tightened by using a 4mm or 5/32" hex key.